Sonicators for ASTM Test and Practice Standards

Hielscher ultrasonicators deliver controlled, repeatable sonication for ASTM methods involving sonic shear, ultrasonic extraction, cavitation erosion, and MBEC biofilm detachment.

Why Sonicator Selection Matters for ASTM Testing

ASTM methods that use ultrasonic energy depend on defined acoustic cavitation and vibration, controlled amplitude, reproducible sample positioning, and consistent temperature management. The wrong ultrasonic device can create insufficient cavitation, uneven treatment, excessive heating, or poor repeatability. Hielscher sonicators are designed for laboratory validation work with digital amplitude control, data recording, broad sonotrode compatibility, and robust continuous operation.

Why Sonicator Selection Matters for ASTM Testing

ASTM methods that use ultrasonic energy depend on defined acoustic cavitation and vibration, controlled amplitude, reproducible sample positioning, and consistent temperature management. The wrong ultrasonic device can create insufficient cavitation, uneven treatment, excessive heating, or poor repeatability. Hielscher sonicators are designed for laboratory validation work with digital amplitude control, data recording, broad sonotrode compatibility, and robust continuous operation.

Controlled energy input
Digital ultrasonic generators help keep amplitude, time, pulse settings, and process temperature traceable for method documentation.

Method-specific geometries
Probe sonicators, high-power cavitation systems, and plate sonicators match different ASTM sample formats, from beakers to microtiter plates.

Repeatable sample treatment
Stable sonication conditions improve inter-run comparability for viscosity change, extraction efficiency, cavitation erosion, and biofilm recovery.

Recommended Hielscher Sonicators for ASTM Standards

The following ASTM standards use sonication as a core test step or as a sonication-assisted sample preparation step. Select the model that matches the required sample geometry, power level, and throughput.

ASTM D2603 – Sonic Shear Stability of Polymer-Containing Oils

ASTM D2603 evaluates the shear stability of polymer-containing oils by measuring permanent viscosity loss after irradiation in a sonic oscillator. The test is used for fluids such as lubricating oils, transmission fluids, tractor fluids, and other polymer-modified oils where viscosity-index improvers may degrade under intense shear.

Core sonication function: intense and focused cavitation and shear generated by an ultrasonic probe.
Critical control points: fixed test time, defined probe geometry, sample temperature control, and reproducible immersion depth.
Typical result: viscosity before and after sonication to quantify permanent viscosity loss.
Recommended sonicator: Hielscher UP400St with S24d22 sonotrode.
The UP400St is the preferred Hielscher configuration for ASTM D2603 because it provides 400 W ultrasonic power at 24 kHz, precise amplitude control, integrated temperature monitoring, and compatibility with the S24d22 probe geometry used for sonic shear stability testing.
Learn more about ASTM D2603!

ASTM D5621 – Sonic Shear Stability of Hydraulic Fluids

ASTM D5621 measures the shear stability of hydraulic fluids by determining the final viscosity after ultrasonic irradiation in a sonic oscillator. It is especially relevant for hydraulic fluids containing shear-sensitive or shear-resistant polymer additives.

Core sonication function: accelerated polymer shear through acoustic cavitation.
Critical control points: ultrasonic horn selection, amplitude stability, temperature control, and consistent test duration.
Typical result: final viscosity or viscosity change after standardized sonic treatment.
Recommended sonicator: Hielscher UP400St with S24d22 sonotrode.
The UP400St is also the ideal choice for ASTM D5621. Its 24 kHz probe-type ultrasonic shear setup gives laboratories a compact, digitally controlled platform for repeatable hydraulic-fluid shear testing.
Learn more about ASTM D5621!

astm g32 – Cavitation Erosion Using Ultrasonic Vibratory Apparatus

ASTM G32 describes cavitation erosion testing using a vibratory apparatus. A specimen is exposed to high-frequency vibration – generated by a sonicator – in a liquid, producing the formation and collapse of cavities that cause measurable material loss. The method is used to compare cavitation erosion resistance of metals, coatings, and other engineering materials.
 

Shembull i fletës së punës për testimin e erozionit me kavitacion

 
Core sonication function: controlled cavitation field generated by a vibrating sonotrode.
Critical control points: amplitude, specimen geometry, gap distance, liquid temperature, exposure time, and specimen mass loss measurement.
Typical result: erosion rate, cumulative mass loss, or comparative cavitation resistance.
Recommended sonicator: Hielscher UIP1000hdT.
The UIP1000hdT is an excellent Hielscher choice for ASTM G32 because its 1000 W, 20 kHz probe-type design provides the high, stable amplitude required for reproducible cavitation erosion studies. For lower or higher power requirements, Hielscher UIP500hdT and UIP2000hdT configurations are suitable alternatives.
Learn more about ASTM G32!
Get insight into the procedure of a cavitation erosion test!

ASTM E1979-21 – Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Lead Determination

ASTM E1979-21 is an ultrasonic extraction practice for preparing environmental samples prior to analytical lead determination. It applies to matrices such as dry paint films, settled dust, soil, and air particulates from lead abatement, renovation, occupational hygiene, and environmental monitoring contexts.
 
Core sonication function: ultrasonic extraction to make lead available for subsequent analytical measurement.
Critical control points: extraction vessel, sonication time, temperature, acid matrix, and consistent energy transfer.
Typical result: extracted lead concentration determined by a downstream laboratory analytical method.
Recommended sonicator: Hielscher UP200Ht or UP400St.
For routine ASTM E1979 sample preparation, the UP200Ht is a strong laboratory choice for small to medium extraction volumes. The UP400St is recommended when higher intensity, larger sample throughput, or broader sonotrode flexibility is required.
Learn more about ASTM E1979-21!

ASTM E2799-22 – Testing Disinfectant Efficacy Against Pseudomonas aeruginosa Biofilm Using the MBEC Assay

ASTM E2799-22 specifies operational parameters for growing, treating, neutralizing, and recovering Pseudomonas aeruginosa biofilm in a high-throughput MBEC assay format. Biofilm grows on a 96-peg lid that corresponds to a 96-well receiver plate. After disinfectant exposure, sonication is used as a biofilm detachment and recovery step.

Core sonication function: simultaneous, reproducible detachment of biofilm from a 96-peg MBEC lid into microplate wells.
Critical control points: uniform ultrasonic energy across the entire plate, controlled exposure time, low cross-contamination risk, and cell recovery without excessive destructive energy.
Typical result: quantitative recovery of viable biofilm cells after disinfectant treatment.
Recommended sonicator: Hielscher UIP400MTP.

The UIP400MTP is ideal for ASTM E2799-22 because it is built for microtiter plates rather than single-vessel probe treatment. It delivers uniform ultrasound across the full plate, enabling simultaneous treatment of all wells and reproducible detachment of biofilms from MBEC peg lids. This makes it better suited than a handheld probe for high-throughput biofilm workflows, where consistent plate-wide energy distribution and sample-to-sample comparability are essential.
 
Read more about the UIP400MTP and the MBEC assay!
Learn more about ASTM E2799-22!

Always follow the official ASTM standard, the current revision in your laboratory quality system, and any validated internal SOP. Hielscher can help configure sonotrodes, fixtures, vessels, and accessories to match the required method geometry.
ASTM standards are controlled documents. This page summarizes sonication-related test applications and equipment selection guidance; it does not replace the official ASTM method text.

Dizajn, Prodhim dhe Konsulencë – Cilësi e prodhuar në Gjermani

Ultrasonikët Hielscher janë të njohur për cilësinë e tyre më të lartë dhe standardet e dizajnit. Qëndrueshmëria dhe funksionimi i lehtë lejojnë integrimin e qetë të ultrasonikëve tanë në objektet industriale. Kushtet e vështira dhe mjediset kërkuese trajtohen lehtësisht nga ultrasonikët Hielscher.

Hielscher Ultrasonics është një kompani e certifikuar ISO dhe i kushton theks të veçantë ultratingujve me performancë të lartë që paraqesin teknologjinë më të fundit dhe lehtësinë ndaj përdorimit. Sigurisht, ultrasonikët Hielscher janë në përputhje me CE dhe plotësojnë kërkesat e UL, CSA dhe RoHs.

Literatura / Referencat