Reaalajas Exceli logger Hielscher Sonicator XML andmete jaoks
Kuidas see toimib
Käivitamisel palub skript kasutajal sisestada oma sonikaatori xml-andmete XML-allika aadress (nt http://192.168.233.233/mdata.xml). Seejärel loob see struktureeritud päise rea ja hakkab iga sekundiga andmeid välja otsima. Iga uus andmepunkt lisatakse tabelisse ja hajuvusdiagramm näitab võimsuse, amplituudi ja energia suundumusi aja jooksul. Kõik anduri veaväärtused (nt kui andur ei ole ühendatud) filtreeritakse automaatselt välja.
Juhised Windowsi kasutajatele
Avage Exceli Visual Basic Editor, sisestage uus moodul ja kleepige kogu skript. Pärast InitLoggeri makro käivitamist käivitub logger automaatselt. Veenduge, et makros on lubatud ja et Excelil on juurdepääsuluba teie võrgule.
Juhised macOS-i kasutajatele
Avage Excelis Visual Basic Editor. Sisestage uus moodul ja kleepige kogu skript. Lihtsalt käivitage sama makro ja andmed hangitakse etteantud IP-koodi abil. MacOS-i kasutajad peavad lubama Excelil AppleScripti käivitada ja võivad olla vaja anda süsteemieelistustes võrgule juurdepääsu, kui seda küsitakse.
Käivita Exceli VBA-kood, et laadida sonikaatori XML-andmed tabelisse.
Uuendused, loobumine vastutusest ja litsents
Sõltuvalt seadme tüübist ja tarnitud tarkvaraversioonist võib xml-andmestik erineda. See võib sisaldada erinevat arvu väärtusi ja erinevas järjekorras või formaadis. Seega võib olla vaja allpool esitatud skripti vastavalt kohandada. Tehnilise toe, veaparanduste või tulevaste uuenduste osas ei ole mingeid kohustusi. Seda tööriista pakutakse ilma igasuguste garantiide või garantiideta. See välistab selgesõnaliselt kaudsed garantiid, nagu kaubeldavus või sobivus konkreetseks otstarbeks. Hielscher Ultrasonics ei vastuta tarkvara kasutamisest tulenevate kahjude, sealhulgas otseste, kaudsete või kaudsete kahjude eest. See on ainult näide. Seda võib vabalt kasutada ainult mittekaubanduslikel ja uurimuslikel eesmärkidel. Ümberjaotamine on lubatud nõuetekohase viitamisega. Kommertslik edasimüük või lisamine omandisüsteemidesse on rangelt keelatud ilma eelneva kirjaliku nõusolekuta.
Sonicator XML andmed Exceli tabelisse
' ==============================================================================
' Realtime Excel Logger for Hielscher Sonicator XML Data
'
' Description:
' This VBA module fetches XML data from a Hielscher sonicator over the network
' (typically from a local IP like http://192.168.233.233/mdata.xml), parses it,
' logs real-time data into Excel, and visualizes selected parameters (Power, Amplitude,
' and Energy) using a live updating scatter-line chart.
'
' Disclaimer & License:
' This script is provided "as is" without any warranty. It is free for non-commercial
' use, and redistribution is permitted only with attribution. Resale or inclusion in
' commercial software is strictly prohibited without explicit permission.
' (c) Hielscher Ultrasonics GmbH (Germany), 2025. All rights reserved. https://www.hielscher.com
' Last Update: June 17th, 2025, for sonicator software version 25.0.1
' ==============================================================================
' === Realtime Excel Logger Module ===
Dim nextRow As Long ' Row index for logging the next data point
Dim chartObject As chartObject ' Reference to the live chart object
Dim isRunning As Boolean ' Controls whether logging continues
' === MAIN ENTRY POINT ===
Sub InitLogger()
Dim ws As Worksheet
Set ws = Sheet1 ' Use the first worksheet
ws.Cells.Clear ' Clear all existing content on the sheet
' Request and store the XML source IP address
ws.Cells(1, 1).Value = "XML Source"
ws.Cells(1, 2).Value = InputBox("Enter device IP address", "XML Source", "http://192.168.233.233/mdata.xml")
' Create header row starting at row 2
ws.Cells(2, 1).Resize(1, 14).Value = Array( _
"Timestamp", "Status", "Total Power (W)", "Net Power (W)", "Amplitude (%)", _
"Energy (Ws)", "ADC", "Frequency (Hz)", "Temperature (°C)", "Time (s)", _
"ControlBits", "LimitType", "SetPower (%)", "Cycle (%)")
nextRow = 3 ' Start logging at row 3
isRunning = True ' Enable logging loop
Application.OnTime Now + TimeSerial(0, 0, 1), "LoggerTick" ' Schedule first data fetch
End Sub
' === PERIODIC TIMER CALLBACK ===
Sub LoggerTick()
If Not isRunning Then Exit Sub
FetchOnce
Application.OnTime Now + TimeSerial(0, 0, 1), "LoggerTick" ' Schedule next fetch
End Sub
' === FETCH AND LOG DATA ===
Sub FetchOnce()
Dim ipAddress As String, rawData As String
Dim dataFields() As String, mStart As Long, mEnd As Long
Dim ws As Worksheet: Set ws = Sheet1
ipAddress = Trim(ws.Cells(1, 2).Value) ' Get IP from input cell
If ipAddress = "" Then Exit Sub ' Exit if IP is missing
rawData = GetMDataXML(ipAddress) ' Fetch the raw XML from device
If rawData = "" Then Exit Sub ' Exit if fetch failed
' Extract only the content inside ...
mStart = InStr(rawData, "")
mEnd = InStr(rawData, " ")
If mStart = 0 Or mEnd = 0 Then Exit Sub ' Exit if tag not found
rawData = Mid(rawData, mStart + 7, mEnd - mStart - 7)
dataFields = Split(rawData, ";") ' Parse by semicolon delimiter
If UBound(dataFields) < 12 Then Exit Sub ' Ensure all fields are present
' Determine next available row
nextRow = ws.Cells(ws.Rows.Count, 1).End(xlUp).Row + 1
' Write parsed values into worksheet
With ws
.Cells(nextRow, 1).Value = Format(Now, "yyyy-mm-dd HH:nn:ss") ' Timestamp (rounded to seconds)
.Cells(nextRow, 2).Value = Val(dataFields(0)) ' Status
.Cells(nextRow, 3).Value = Val(dataFields(1)) / 10 ' Total Power (W)
.Cells(nextRow, 4).Value = Val(dataFields(2)) / 10 ' Net Power (W)
.Cells(nextRow, 5).Value = Val(dataFields(3)) / 10 ' Amplitude (%)
.Cells(nextRow, 6).Value = Val(dataFields(4)) ' Energy (Ws)
.Cells(nextRow, 7).Value = Val(dataFields(5)) / 10 ' ADC
.Cells(nextRow, 8).Value = Val(dataFields(6)) ' Frequency (Hz)
.Cells(nextRow, 9).Value = IIf(Val(dataFields(7)) = 2550, "", Val(dataFields(7)) / 10) ' Temperature (°C), blank if 255
.Cells(nextRow, 10).Value = Val(dataFields(8)) / 10 ' Time (s)
.Cells(nextRow, 11).Value = Val(dataFields(9)) ' ControlBits
.Cells(nextRow, 12).Value = IIf(Val(dataFields(10)) = 0, "", Val(dataFields(10))) ' LimitType, blank if 0
.Cells(nextRow, 13).Value = Val(dataFields(11)) / 20 ' SetPower (%)
.Cells(nextRow, 14).Value = Val(dataFields(12)) / 10 ' Cycle (%).Value = Val(dataFields(12)) / 10 ' Cycle (%)
End With
UpdateChart
End Sub
' === CREATE / UPDATE SCATTER-LINE CHART ===
Sub UpdateChart()
Dim ws As Worksheet: Set ws = Sheet1
Dim lastRow As Long: lastRow = ws.Cells(ws.Rows.Count, 1).End(xlUp).Row
If lastRow < 4 Then Exit Sub
' Format timestamp column to display yyyy-mm-dd HH:mm:ss
ws.Columns(1).NumberFormat = "yyyy-mm-dd hh:mm:ss"
' Create chart if not already initialized
If chartObject Is Nothing Then
Set chartObject = ws.ChartObjects.Add(Left:=ws.Cells(2, 16).Left, Top:=ws.Cells(2, 16).Top, Width:=500, Height:=300)
chartObject.Name = "LiveChart"
End If
' Configure the scatter line chart with latest data
With chartObject.Chart
.ChartType = xlXYScatterLines
Do While .SeriesCollection.Count > 0: .SeriesCollection(1).Delete: Loop
' Plot Total Power
.SeriesCollection.NewSeries
.SeriesCollection(1).Name = "Power (W)"
.SeriesCollection(1).XValues = ws.Range("A3:A" & lastRow)
.SeriesCollection(1).Values = ws.Range("C3:C" & lastRow)
' Plot Amplitude
.SeriesCollection.NewSeries
.SeriesCollection(2).Name = "Amplitude (%)"
.SeriesCollection(2).XValues = ws.Range("A3:A" & lastRow)
.SeriesCollection(2).Values = ws.Range("E3:E" & lastRow)
' Plot Energy
.SeriesCollection.NewSeries
.SeriesCollection(3).Name = "Energy (Ws)"
.SeriesCollection(3).XValues = ws.Range("A3:A" & lastRow)
.SeriesCollection(3).Values = ws.Range("F3:F" & lastRow)
.HasTitle = True
.ChartTitle.Text = "Hielscher Sonicator: Live Chart"
.Axes(xlCategory).HasTitle = True
.Axes(xlCategory).AxisTitle.Text = "Time"
.Axes(xlValue).HasTitle = True
.Axes(xlValue).AxisTitle.Text = "Value"
' Format the X-axis to show MM:SS
.Axes(xlCategory).TickLabels.NumberFormat = "mm:ss"
End With
End Sub
' === FETCH XML VIA PLATFORM-SPECIFIC METHOD ===
Function GetMDataXML(ip As String) As String
Dim os As String: os = Application.OperatingSystem
' macOS: use AppleScript shell call to curl
If InStr(1, os, "Mac", vbTextCompare) > 0 Then
Dim script As String
script = "do shell script " & Chr(34) & "curl -s " & ip & Chr(34)
On Error Resume Next
GetMDataXML = MacScript(script)
If Err.Number <> 0 Then GetMDataXML = ""
' Windows: use MSXML2.XMLHTTP request
Else
Dim http As Object
Set http = CreateObject("MSXML2.XMLHTTP")
On Error Resume Next
http.Open "GET", ip, False
http.Send
If Err.Number = 0 And http.Status = 200 Then
GetMDataXML = http.responseText
Else
GetMDataXML = ""
End If
End If
End Function