خلط بالموجات فوق الصوتية لصناعة مستحضرات التجميل

Hielscher ultrasonic devices are used in the cosmetics industry for manifold processes, e.g. for the manufacturing of lotions, sunscreen, creams or ointments.

The formulation of new cosmetic products involves many processing challenges, such as the تفكك الخلايا and solids, or the التشتت and dissolving of powders into liquids. For such processes, as well as for the production of stable emulsions, degassing, التجانس وكذلك إعداد الجسيمات الشحمية. Hielscher offers ultrasonic mixing equipment for use in both, laboratory research and industrial production.

Cosmetics Research and Analysis

جهاز UP50h

هيلشر أجهزة المختبر بالموجات فوق الصوتية are ideal for research and development as well as for routine processes. Devices like the handheld UP100H are suitable for manifold applications, e.g. mixing, dispersing, emulsifying, homogenizing, botanical extraction or dissolving. The laboratory devices are easy to use, and have an unmatched efficiency and flexibility. Ultrasonic laboratory devices are typically used for capacities from 1mL to 2 liters. Hielscher ultrasonic devices offer accurate process control and excellent reproducibility for the scale up to production scale. Automatic amplitude control and frequency tuning is invaluable for process validation and repeatability. That is why, this feature is integrated in all Hielscher ultrasonic devices.

Ultrasonic Mixer in Cosmetics Laboratory

Ultrasonication can be scaled up easily . Laboratory tests will allow to select the required equipment size accurately. The table below shows general device recommendations depending on the batch volume or flow rate to be processed.

حجم الدفعةمعدل التدفقالأجهزة الموصى بها
1 إلى 500 مل10 إلى 200 مل / دقيقةUP100H
10 إلى 2000 مل20 إلى 400 مل / دقيقةUP200Ht, UP400S
0.1 إلى 20 لتر0.2 إلى 4 لتر / دقيقةUIP1000hd, UIP2000hd
10 إلى 100 لتر2 إلى 10 لتر / دقيقةUIP4000hdt
ن.أ.10 إلى 100 لتر / دقيقةUIP16000
ن.أ.أكبرمجموعة من UIP16000

المعالجة المضمنة

Discrete Recirculation for UltrasonicationHielscher ultrasonic reactors are commonly used in-line. The material is pumped into the reactor vessel. There it is exposed to ultrasonic cavitation at a controlled intensity. The exposure time is a result of the reactor volume and the material feed rate. Inline sonication eliminates by-passing because all particles pass the reactor chamber following a defined path. As all particles are exposed to identical sonication parameters for the same time during each cycle, ultrasonication typically shifts the distribution curve rather than widening it. Generally,right tailingcan not be observed at sonicated samples.

Process Cooling during Sonication

For temperature-sensitive formulations, Hielscher offers jacketed flow cell reactors for all laboratory and industrial devices. By cooling the internal reactor walls, process heat can be dissipated effectively.

قوي وسهل التنظيف

مفاعل خلية التدفق بالموجات فوق الصوتية مصنوع من الفولاذ المقاوم للصدأ لصوتنة السوائل.Hielscher ultrasonic mixing reactor consist of the reactor vessel and the ultrasonic sonotrode (also known as ultrasonic horn, probe or rod). This is the only part, that is subject to wear and it can be easily replaced within minutes. Oscillation-decoupling flanges allow to mount the sonotrode into open or closed pressurizable containers or flow cells in any orientation. No bearings are needed. Flow cell reactors are generally made of stainless steel and have simple geometries and can easily be disassembled and wiped out. There are no small orifices or hidden corners. Special flow cell reactors meeting the advanced CIP (clean-in-place) and SIP (sterilize-in-place) requirements are available, too.

Ultrasonic Cleaner in Place

The ultrasonic intensity used for dispersing applications is much higher than for typical ultrasonic cleaning. Therefore the ultrasonic power can be used to assist cleaning during flushing and rinsing, as the ultrasonic cavitation removes particles and liquid residues from the sonotrode and from the flow cell walls.

اتصل بنا! / اسألنا!

اطلب المزيد من المعلومات

Please use the form below to request additional information about our sonicators for sin care production, application notes, technical data and a non-binding quotation. We will be glad to discuss your mixing process with you and to offer you asonicator fulfilling your requirements!









يرجى ملاحظة سياسة الخصوصية.


Ultrasonic emulsification is used to produce skin care products such as creams and lotions with a high load of active substances.

Ultrasonicator with glass flow cell for the inline mixing and emulsification of creams, lotions and other skin care products.



الموجات فوق الصوتية عالية الأداء! تغطي مجموعة منتجات Hielscher الطيف الكامل من الموجات فوق الصوتية للمختبر المدمجة على وحدات مقاعد البدلاء إلى أنظمة الموجات فوق الصوتية الصناعية الكاملة.

Hielscher الفوق صوتيات بتصنيع الخالط بالموجات فوق الصوتية عالية الأداء من المختبر ل الحجم الصناعي.


سنكون سعداء لمناقشة العملية الخاصة بك.

Let's get in contact.