UIP250MTP - Sonication of Microtiter Plates

The ultrasonic processor UIP250MTP allows for the consistent sonication of an entire microtiter plate within the sonotrode. It can be used for the homogenizing, dispersing, degassing or for disruption of cells.
The ultrasonic power is distributed evenly through each well of the microtiter plate giving you consistent and repeatable sonication effects. Furthermore, the amplitude of oscillation is adjustable and is maintained at the adjusted value for the whole sonication period. The UIP250MTP consists of the 250 watts generator, the sonotrode and the required sound protection hood (acrylic glass). This makes it a complete stand-alone unit that is easy to set-up and operate. The ultrasonic generator is tuned to the frequency of the sonotrode automatically so that there is no manual adjustment required (e.g. in case of a cooled sonotrode). Two attached tubes allow for a continuous flow of the liquid in the sonotrode.
The UIP250MTP can be operated continuously (e.g. 24/7). It is dry-running protected and can be cleaned and disinfected easily. Pulsed operation or different sonication periods can be adjusted exactly at the front panel of the ultrasonic generator.

Request a Proposal for this Item!

To receive a proposal, please put your contact details into the form below. A typical device configuration is pre-selected. Feel free to revise the selection before clicking the button to request the proposal.

Name
Company
Email (required)
Address
Country
Phone Number

Ultrasonic Processor UIP250MTP-Set

ultrasonic processor for the sonication of microtiter plates, 250W, 20kHz, amplitude adjustable from 20 to 100%, control of pulse ratio and sonication time, transducer in stainless steel housing, connections for cooling water, 2m cable between generator and transducer, sonotrode made of titanium, carrying surface 150mmx90mm for microtiter plates, incl. sound protection hood made af acrylic glass
115 Volts, AC, single phase, 8A, 50-60Hz
230 Volts, AC, single phase, 4A, 50-60Hz

Power Meter PowMet115

versatile, for display of current power, cumulated energy and cumulated operation time, 115V~1P, 50-60Hz

Power Meter PowMet230

versatile, for display of current power, cumulated energy and cumulated operation time, 230V~1P, 50-60Hz

PC-Interface Box UPC-L

PC-control (lab version) with power recording, consisting of interface box (aluminum, 105x80x30), connection cable leading to the 9-pin DSUB socket (RS232) at the PC, software for Windows95/98/NT/XP®

PC-Interface Box UPCT-L

PC-control (lab version) with power and temperature recording (including temperature probe), consisting of interface box (aluminum, 105x80x30), connection cable leading to the 9-pin DSUB socket (RS232) at the PC, software for Windows95/98/NT/XP®